Differences
between 641/2 and 65 Mustangs
|
1964 1/2 |
1965 |
|
Exterior |
Exterior |
|
* Beveled hood edge and grill side panel |
* Deleted in later models |
|
* Hood bumpers have recessed Phillips head screw to secure stud |
* Domed hood bumper molded to the rubber bumper to the stud. |
|
* Slotted cast iron engine pulleys |
* Stamped steel. |
| * Generator with air louvers in radiator core support but large air louvers are deleted. | * Alternator with four small rectangular cutouts in radiator core support to keep the battery cool |
| * Slotted anchor bolt and tie down for spare tire. | * Pass through hold-down with hook-type anchor bolt. |
|
* Horns are much larger and mounted down on frame behind radiator |
* Horns are smaller and mounted to
front of radiator core support. |
|
* Coil is mounted on intake due to lack of space. |
*Alternator
is mounted to engine's front cover. |
|
Interior |
Interior |
|
* " A " ( for air ) stamped into driver's fresh air knob. |
* Deleted. |
| * Two fan blower speeds with " OFF " in center position |
* Three
fan blower speeds with "OFF"
in the left position. |
| * Door lock plunger color keyed to interior | * Bright Mylar ( plastic chrome ) |
| * Carpet has color keyed rubber heel pad but no toe pad | * Has both heel and toe pads. |
| * Carpet stops at inner rocker panel. |
* Carpet travels up the rocker panel and beneath the door sill plate |
| * Interior door handles & window cranks are held in place by spring clips. | * Have raised handles held in place by Allen-head screws. |
| * Seat belts are held in place by eye bolts. | * Held in place by standard hex-head machine bolts. |
| * Standard seats and interior. | * March of 1965, " Pony " interior introduced. |
Have Seeked Knowledge of
Mustangs
